Nikon S9400 - S9500 - Manual (Page 114)

92
Features That Can Be Set Using the
d (Menu) Button (GPS Options Menu)
Usin
g
GPS
/E
le
ctron
ic
C
o
mpass
(C
OOLPIX
S
9
50
0
on
ly
)
Create log
The measured position information is recorded at the
interval set for Log interval until a preset time set using
Start log is reached (only when Record GPS data in GPS
options of the GPS options menu is set to On).
• To display the log data, select End log and save the log to
a memory card.
E62
View log
You can delete log data that was recorded to a memory card
using End log in Create log.
• To delete a log, select it and press the
l button.
E64
Synchronize
Signals from the GPS satellites are used to set the date and
time of the camera’s internal clock (only when Record GPS
data in GPS options of the GPS options menu is set to On).
E64
Electronic
compass
Compass display: When set to On, the direction the
camera is pointing is displayed on the shooting screen.
When the monitor faces upward, the compass indicator
switches to a circle compass with a red arrow that points
north. The default setting is Off.
Compass correction: Corrects the compass when the
compass direction is not displayed correctly. Swing the
camera to draw a figure eight in the air while turning your
wrist to face the camera forward and backward, side to side,
or up and down.
E65
Option Description A