Nikon S9400 - S9500 User Manual
Page 120
98
The Setup Menu
General Came
ra Setup
TV settings
Adjust settings for connection to television.
• When the camera is connected to a television using an
audio/video cable but no picture is displayed on the
television, set Video mode to NTSC or PAL according to
the type of signal compatible with the television.
• HDMI settings can be set.
Charge by
computer
When set to Auto (default setting), you can charge the
camera’s battery by connecting the camera to a computer
(provided that the computer is able to supply power).
• When charging by computer, it may take more time to
charge the battery than when using the Charging AC
Adapter EH-70P.
Blink warning
When the camera detects that a human subject may have
closed the eyes immediately after taking a picture using face
detection while shooting with modes other than the smart
portrait (
A67), the Did someone blink? screen is displayed
on the monitor to check the picture taken. The default setting
is Off.
Wi-Fi options
(COOLPIX S9500
only)
To connect the camera to your smart device, set the Wi-Fi
network (wireless LAN) to on. You can also change network
information such as the camera’s SSID and password.
Eye-Fi upload
Set whether or not to enable the function for sending images
to a computer using a commercially available Eye-Fi card. The
default setting is Enable.
Filmstrip
When On is selected, thumbnails of previous and subsequent
images are displayed at the bottom of the monitor when you
rotate the multi selector quickly while viewing an image in
full-frame playback mode (
A28). The default setting is Off.
Reset all
Reset the camera’s settings to their default values.
• Some of the settings such as Time zone and date and
Language are not reset.
Firmware version
Display the current camera firmware version.
Option
Description
A