Nikon S9400 - S9500 - Manual (Page 119)

97
The Setup Menu
General Came
ra Setup
Vibration
reduction
Reduce blurring caused by camera shake when shooting. The
default setting is On.
• When using a tripod to stabilize the camera, set this feature
to Off to prevent this feature from malfunctioning.
E73
Motion detection
When the camera detects camera shake or subject
movement at the time of shooting, it automatically increases
ISO sensitivity and shutter speed to reduce blurring. The
default setting is Auto.
The r indicator lights in green when the camera detects
camera shake or subject movement and increases shutter
speed.
• When using certain shooting modes or settings, motion is
not detected. In this case the r indicator is not displayed.
E74
AF assist
When set to Auto (default setting), the AF-assist illuminator
(
A26) lights if shooting in dark surroundings to help the
camera focus.
• Even if Auto is selected, the AF-assist illuminator may not
light depending on the position of the focus area or the
scene mode that is selected.
E75
Digital zoom
When set to On (default setting), rotating the zoom control
toward
g (i) triggers the digital zoom (A25) if the optical
zoom is at the maximum telephoto zoom position.
When set to Crop, the digital zoom is limited to the range (to
the zoom position V) at which image quality of the shot still
picture does not deteriorate.
• The digital zoom cannot be used simultaneously
depending on settings in the shooting mode and other
modes.
E76
Sound settings
Turn various camera sounds on and off. In the default setting,
beep sounds are on.
• The operation sound is disabled depending on settings in
the shooting mode and other modes.
E77
Auto off
Set the amount of time that passes before the monitor is
turned off to save power. The default setting is 1 min.
E77
Format memory/
Format card
Format the internal memory (only when a memory card is not
inserted) or the memory card (when a memory card is
inserted).
• All data stored in the internal memory or on the
memory card is deleted during formatting and
cannot be restored. Be sure to transfer important images
to a computer and save them before formatting.
E78
Language Change the camera’s display language.
E78
Option Description A