Nikon S9400 - S9500 - Manual (Page 117)

95
Connecting the Smart Device to the Camera
U
sin
g
th
e
Wi
-Fi
(
W
irel
es
s L
A
N)
Fe
at
u
re
(CO
O
L
P
IX
S
9
5
00 on
ly)
To Terminate the Wi-Fi Connection
• Turn off the camera.
• Set the Wi-Fi setting on the smart device to Off.
B
Notes on Wi-Fi Connection
• Set the Wi-Fi network to Off in a place where the use of radio waves is prohibited.
• When a memory card is not inserted in the camera, the Wi-Fi feature cannot be used. When Eye-Fi
card ( E85) is inserted in the camera, the Wi-Fi feature cannot be used.
• When Wi-Fi is connected, Auto off is disabled.
• When the Wi-Fi network is set to On, the battery will drain faster than normal.
• The Wi-Fi network cannot be selected when the battery level indicator in the monitor indicates
B. In addition, if the battery level indicator indicates B while a Wi-Fi connection is established,
the connection is terminated.
C
Note on Security Settings
If the camera is installed with the Wi-Fi feature without proper security settings (encryption and
password), unauthorized third parties may access the network and cause harm. We strongly
recommend performing the required security settings before using the Wi-Fi feature.
Use Wi-Fi options of the setup menu ( A96) to perform the security settings.