Using preset manual, E32), E 32 – Nikon S9400 - S9500 User Manual
Page 152: Button, Choose measure
E32
The Shooting Menu (A (Auto) Mode)
Re
feren
ce
S
ect
io
n
Using Preset Manual
Use when you want to make pictures taken under unusual lighting conditions
(e.g., lamps with reddish-light) look as though they were shot in normal light.
Use the procedure below to measure the white balance value under the lighting
used during shooting.
1
Place a white or gray reference object under the lighting that will be
used during shooting.
2
Display the shooting menu (
multi selector to set White balance to
b Preset manual, then press the
k
button.
• The lens extends to the zoom position for
measurement.
3
Choose Measure.
• To apply the most recently measured white balance
value, select Cancel and press the
k button. The most
recently measured white balance value will be set
without re-measuring the value.
4
Frame a white or gray reference object in the
reference object frame and press the
k
button.
• The shutter is released and the new white balance
preset value is set (no picture is recorded).
B
Note on Preset Manual
The camera cannot measure a white balance value for when the flash fires. When shooting with the
flash, set White balance to Auto or Flash.
Flash
Flash
Flash
Flash
Flash
Cloudy
Cloudy
Cloudy
Fluorescent
Fluorescent
Fluorescent
Incandescent
Incandescent
Incandescent
Daylight
Daylight
Daylight
Preset manual
Auto
Auto
Auto
White balance
Measure
Cancel
Preset manual
Measure
Cancel
Preset manual
Reference object frame