F 11, Playback issues – Nikon S9400 - S9500 User Manual
Page 231
F11
Troubleshooting
Te
chni
cal
Not
e
s an
d In
de
x
Playback Issues
The image taken
becomes grainy.
As the subject is dark, shutter speed is too slow or ISO sensitivity
is too high.
• Use flash.
• Specify a lower ISO sensitivity setting.
Pictures are too
dark.
• Flash is set to W (off ).
• Flash window is blocked.
• Subject is beyond flash range.
• Adjust exposure compensation.
• Raise the ISO sensitivity.
• Subject is backlit. Set the scene mode to
W
(Backlighting)
with HDR set to Off, or set the flash mode to X (fill flash).
Pictures are too
bright.
Adjust exposure compensation.
Areas not affected
by red-eye are also
corrected.
When V (auto with red-eye reduction) or “fill flash with red-eye
reduction” of the
S (Night portrait) scene mode is applied
during shooting, In-Camera Red-Eye Fix may, in very rare cases,
be applied to areas not affected by red-eye. Set the flash mode to
other than V (auto with red-eye reduction), select a scene
mode other than
S (Night portrait), and resume shooting.
Skin softening
results are not as
expected.
Skin softening may not produce the desired results depending
on shooting conditions.
Saving images
takes time.
It may take more time to save images in the following situations.
• When the noise reduction function is in operation
• When flash is set to V (auto with red-eye reduction)
• When taking pictures in the following scene modes.
- Hand-held in
X (Night landscape), S (Night portrait)
- HDR set to On in
W (Backlighting)
- Easy panorama
• Continuous in the shooting menu is set to Pre-shooting
cache, Continuous H: 120 fps or Continuous H: 60 fps
• When using smile timer while shooting
–
51
Cannot set or use
Continuous.
Another function that is set now is restricting Continuous.
Problem
Cause/Solution
A
File cannot be
played back.
• File was overwritten or renamed by computer or another
make or model of camera.
• Movies recorded with cameras other than the COOLPIX
S9500/S9400 cannot be played back.
–
Cannot play a
sequence.
• Pictures shot continuously with cameras other than the
COOLPIX S9500/S9400 cannot be played as a sequence.
• Check the Sequence display options setting.
–
Problem
Cause/Solution
A