elektraLite CP20 - Manual (Page 5)

4
INTRODUCTION
The Elektralite CP20 is a small but powerful moving light controller designed to control up
to twenty-four moving light fixtures. It is quick and easy to program and will do many of the things that up until
now could only have been done with much more expensive lighting consoles.
Features
•
19 inch rack mount, 4 rack space chassis.
•
Battery backed RAM for 960 cues, 96 chases, and 96 macros.
•
Color, Gobo, Special and Preset (focus) Palettes.
•
32 character Blue LCD display for easy programming.
•
Simple panel layout with dedicated switches for ease of use.
•
High quality 60mm faders for fixture feature control.
•
Separate faders for crossfade and chase speed control.
•
High quality joystick for pan and tilt control.
•
12 digit keypad for data entry.
•
24 Direct Access Keys
•
Audio input for chase speed control.
•
Midi in and out for automation.
•
DMX512 output.
•
Extensive library of fixture types.
•
RS 232 Port for memory backup and use of trackball or mouse.
Please note throughout this manual you will see references to the following "-Å" and "Æ+" keys/buttons. On
the LCD display you will sometimes get a display which will read NO - or YES+. This means you
need to make a decision using either the "Å" and "Æ" keys. Just remember "Å" is the – (minus) NO key and
"Æ" is the + (plus) YES key.
Chapter
1