elektraLite CP20 - Manual (Page 7)

6
AUDIO IN
Connect the audio input to a line level output from a mixing console or an audio preamp. Do not connect this
to a power amp or any speaker level source. Consult the chapter on chases as to how this input is used.
MIDI IN/OUT
If you are using MIDI with the CP20, connect the MIDI out on the CP20 to the MIDI in on your computer
interface, sequencer, or data storage device. Connect the MIDI out on the CP20 to the MIDI in on the other
device. Read the chapter on MIDI for more information.
RS 232 Port
The RS232 can be used to plug in a mouse, trackball or any similar device. The device used must be PC
compatible and must use a RS232 connector.