Sony DCR-VX1000E - Manual (Page 93)

93
Información adicional
Additional Information
Cause and/or Corrective Actions
• Set the DIGITAL MODE to ZOOM/16:9 WIDE. (p.
35)
• Set the DIGITAL MODE to OVERLAP. (p. 31)
• Insert a cassette. (p. 10)
Cause and/or Corrective Actions
• Adjust the viewfinder lens. (p. 13)
• Select the programme position or input for the camcorder
correctly on the TV. (p. 19)
• The contrast between the subject and background is too
high. The camcorder is not malfunctioning.
m Change locations.
• The video heads may be dirty.
m Clean the heads using the Sony DVM12CL (not supplied)
cleaning cassette. (p. 89)
• The video heads may be dirty.
m Clean the heads using the Sony DVM12CL (not supplied)
cleaning cassette. (p. 89)
• The ambient temperature is too low.
• Remove the DV connecting cable, and connect again.
Cause and/or Corrective Actions
• Set the COMMANDER to VTR4 or ID in the menu system.
(p. 26)
• Something is blocking the infrared rays.
m Remove the obstacle.
• The batteries are dead.
m Insert new ones. (p. 105)
Operation
Symptom
D ZOOM or 16:9 WIDE mode in the menu
system cannot be set to ON.
The overlap function does not active.
Sound level meter does not activate while
recording.
Picture/Sound
Symptom
The image on the viewfinder screen is not
clear.
The playback picture is not clear or cannot
be monitored.
A vertical band appears when a subject
such as lights or a candle flame is shot
against a dark background.
The picture is ”noisy” or hardly visible.
v indicator flashes in the viewfinder.
Battery remaining indicator does not
indicates full ı, when you insert the
charged battery pack.
While editing using the DV connecting
cable, recording picture cannot be
monitored.
Others
Symptom
The supplied Remote Commander does
not work.