AT&T CL84109 - Manual (Page 29)

23
Telephone settings
Telephone base settings
Menu settings
Use the feature menu on the telephone base to customize how the telephone
base works. Refer to page 14 to customize how a handset works.
1. Press MENU/
SELECT
in idle mode (when the phone is not in use) to enter the
main menu.
2. Use q CID or DIRp to scroll to the feature to be changed. When scrolling
through the menu, the top menu item is always highlighted with a > symbol.
3. Press
MENU
/SELECT to select the highlighted item.
NOTE: To cancel an operation, back up to the previous menu or exit the menu display, press
CLEAR. Press and hold CLEAR to return to idle mode.
Ringer volume
Using the main menu, you can set a ring volume level (1-6), or turn the
ringer off. When the ringer is turned off, the
appears on the screen of the
telephone base.
To adjust the
RINGER VOLUME on the telephone base:
1. Press MENU/
SELECT
in idle mode to enter the main
menu.
2. Use q CID or DIRp to scroll to the > RINGER VOLUME
menu, then press
MENU
/SELECT.
3. Press q CID or DIRp to sample each volume level.
4. Press
MENU
/SELECT to save your preference and
return to the main menu.
-OR-
Press the
VOLUME qp buttons on the telephone base in idle mode to change
ringer volume.
NOTE: The ringer volume level also determines the ringer levels of intercom calls. If the
telephone base ringer volume level is set to off, the base ringer is silenced for all incoming
and intercom calls.
< RINGER VOLUME
RINGER TONE
MSG #
- -
RINGER VOLUME
MSG #
- -