AT&T CL84109 - Manual (Page 43)

37
Multiple handset use
Call transfer using intercom
The other person can end the intercom call by pressing OFF/
CLEAR
, or
by placing the other handset back in the charger. The outside call continues
with the original system handset.
Using the telephone base:
1. During a call, press
INTERCOM/
HANDSET LOCATOR.
If you have a single handset system, the telephone base’s screen shows
CALLING HANDSET. The handset screen shows BASE IS CALLING.
If you have more than one handset, the telephone base’s screen shows
TRANSFER TO: Use the dialing keys to select the handset number. The
telephone base’s screen then shows
CALLING HANDSET X. The handset
screen shows BASE IS CALLING.
2. On the ringing handset, press PHONE/
FLASH
, INT, SPEAKER, or
any dial pad key (0-9, * or #) to answer the intercom call. You can now talk
without the outside caller hearing the conversation.
3. From this intercom call, you have the following options:
You can let the handset join you on the outside call in a three-way
conversation. Press and hold
INTERCOM/
HANDSET LOCATOR
on the telephone
base.
You can transfer the call. Place your corded handset back in the
telephone base, or press
SPEAKER if you are using the speakerphone.
The telephone base’s screen shows CALL TRANSFERED. The handset
automatically connects to the outside call.
You can alternate between the outside call (
OUTSIDE CALL appears on the
screen) and the intercom call ( INTERCOM appears on the screen). Press
INTERCOM/
HANDSET LOCATOR
on the telephone base to alternate.
The other person can end the intercom call by pressing OFF/
CLEAR
, or
by placing the other handset back in the charger. The outside call continues
with the telephone base.
•
•
•
•
•
•
•