IPitomy IP1000 User Guide - Manual (Page 20)

Setting Internet Connection Type
The IP1000 supports six connection types: Automatic Configuration – DHCP, Static IP,
PPPoE, PPTP, L2TP, and Telstra Cable. Each setup screen and available features will
differ depending on what kind of connection type you select.
ƒ Automatic Configuration (DHCP) – By default, the IP1000’s Internet Connection
Type is set to Automatic Configuration (DHCP), and it should be used only if your ISP
supports DHCP or you are connecting through a dynamic IP address.
ƒ Static IP – If a permanent IP address is provided then select Static IP. And settings
for following network attributes are required. Contact service provide or the network
administrator for any Information missed.
o Internet IP Address – Normally the static IP address is a public IP address
provided by service provider; it is used for connecting to Internet. If it is a local
IP address assigned by the network administrator; the router function in
IP1000 may need to be disabled.
o Subnet Mask – The subnet mask Information should be provided along with
IP address.
o Default Gateway – The IP address for the default network gateway, it is the
information service provider should provide.
o DNS 1-3 – Service provider will provide at least IP address for one DNS
(Domain Name System) server. At most three DNS servers can be set.
Copyright
© IPitomy Communication, LLC 15 0007VRF