IPitomy IP1000 User Guide User Manual
Page 80
interface
It should also be noted that you can always perform the standard Auto-Discovery that has
been available for Aastra Phone sets. This process can now be performed on IP550 also. It
is the same as discussed in the Auto-Discovery section of the Manual.
Make you appropriate button changes from this screen and then select Save and Restart
the Phone. Once the phone restarts the new buttons should be accessible. This process is
unchanged from how it was performed with Aastra phones and should be recognizable to
users of Aastra phones. Additionally these buttons mapping controls can be used via the
Smart Personal Console for users with permissions to use the SPC. To access the Button
Copyright
© IPitomy Communication, LLC
75
0007VRF