IPitomy IP1000 User Guide - Manual (Page 78)

Create an extension or extensions to be used by IP550 phones by browsing to
Destinations and then Extensions and create either a single extension or a group of
extensions to be utilized. You can also use the Import .CSV feature. This import feature is
particularly relevant with Auto-Provisioning as you can in almost a single step import the
Extensions list and create extensions. Then using the rest of the Auto-Provision setup the
installer can rapidly deploy the phones to the desktop which is usually one of the most time
consuming tasks in the installation process. This is a brief explanation of the import .CSV
feature.
CSV Upload
When creating the CSV file each line is a record consisting of 1-5 comma separated fields.
The order of the fields
Must be as follows:
Name, Email, Number, Phone Type, MAC Address
Number: the extension number.
Phone Type: This should be spelled out in English. Example IPitomy 550
You may omit fields starting from the right hand side of a record but the order of the
remaining fields must match the file format above.
Comments may be placed in the CSV file by using ‘#’ marks. Comments must either be at
the start of a line or have only spaces in front of the mark. Comments must not be placed
on the same line as a record entry. You may also utilize the IPitomy setup worksheet which
is available at the IPitomy web site which will provide you with a quick way of gathering this
information as well as generating the .CSV file.
Copyright
© IPitomy Communication, LLC 73 0007VRF