IPitomy IP1000 User Guide - Manual (Page 40)

ƒ Web Utility Access – HTTP (Hyper Text Transport Protocol) is the communications
protocol used to connect to servers on the World Wide Web. HTTPS uses SSL
(Secured Socket Layer) to encrypt transmitted data for higher security. IP1000
supports two types of protocols, HTTP or HTTPS, for web access.
ƒ Remote Upgrade – If remote upgrade from outside the local network is allowed,
select Enabled. (You must have the Remote Management feature enabled as well.)
Otherwise, keep the default setting, Disabled.
ƒ Allow Remote IP Address – If allow remote IP address from outside the local
network is allowed, select Any IP Address. If administrators want to specify an
external IP address or a range of IP addresses, then select the second option and
complete the fields provided.
ƒ Remote Management Port – Enter the port number that will be open to outside
access.
UPnP
Universal Plug and Play (UPnP) allows Windows system to automatically configure the IP
PBX for various Internet applications, such as gaming and videoconferencing.
ƒ UPnP – To use UPnP, keep the default setting, Enabled. Otherwise, select
Disabled.
ƒ Allow Users to Configure – Select Enabled if users are allowed to configure
manually while using the UPnP feature. Otherwise, keep the default setting,
Disabled.
ƒ Allow Users to Disable Internet Access – Select Enabled if users are allowed to
configure to prohibit all Internet connections. Otherwise, keep the default setting,
Disabled.
Backup and Restore
ƒ Backup Configurations – To back up the IP1000 network configuration settings,
click this button and follow the on-screen instructions.
ƒ Restore Configurations – To restore the IP1000 network configuration settings,
click this button and follow the on-screen instructions. (You must have previously
backed up the IP1000 network configuration settings.)
Voice Backup and Restore
ƒ Backup Configurations – To back up the IP1000 PBX configuration settings, click
this button and follow the on-screen instructions.
ƒ Restore Configurations – To restore the IP1000 PBX configuration settings for on-
board analog devices, click this button and follow the on-screen instructions. (You
must have previously backed up the IP1000 PBX configuration settings.)
Log
The Log screen provides you with a log of all incoming and outgoing URLs or IP
addresses for your Internet connection.
Copyright
© IPitomy Communication, LLC 35 0007VRF