IPitomy IP1000 User Guide - Manual (Page 61)

attempt to scan the network more often
than this you only get results stored from
a previous scan.
Maximum wait
rn.
Maximum number of seconds to wait for
all packets to retu
Packet Count Number of packets to send.
TX Interval Transmission interval between packets.
Only meaningful when Packet Count is
greater than 1. Minimum allowed value
is 0.2
Batch Size
re run sequentially. Each job will
Divide scanning range into batch jobs.
Jobs a
have at most <Batch Size> pings
running in parallel at a time. The special
value 255 means run all pings as one
big job.
Network
and To range. Example:
Network address with last octet reserved
for From
192.168.1.x
From Start number for last octet of network
address.
To End number for last octet of network
address.
Send Wakeup ping before Survey
Ping if… y receive but have faster
Some devices are slow to respond to the
first ping the
response times afterwards.
Port 80 Ping Wait
nal that it is
Maximum seconds to wait for basic
phone web interface to sig
alive. Rarely used.
Command Wait Maximum seconds to wait for most
Copyright
© IPitomy Communication, LLC 56 0007VRF