IPitomy IP1000 User Guide - Manual (Page 36)

Internet Access Priority
Select Enabled to use the QoS policy and system will allow user to setup the QoS policy.
Administrators can choose to manually set the Internet bandwidth or let system to
determine it automatically.
Category
There are four categories available. Select one of the following: Applications, Online
Games, MAC Address, Ethernet Port, or Voice Device. In this section, you can select the
bandwidth priority for a variety of applications and devices. There are four levels priority:
High, Medium, Normal and Low. When setting priority do not set all applications to High,
because this will defeat the purpose of allocating the available bandwidth. Select Low for
those require normal bandwidth. A few attempts to establish the appropriate bandwidth
priority may be required. It depends on the application.
Applications
ƒ Applications – Select the appropriate application, If you select Add a New
Application – follow the Add a New Application Instructions.
ƒ Priority – Select the appropriate priority: High, Medium, Normal, or Low.
Add a New Application:
Copyright
© IPitomy Communication, LLC 31 0007VRF