Application forwarding, Single port, Single port forwarding – IPitomy IP1000 User Guide User Manual

Page 32

Advertising
background image

Application Forwarding

Single Port

On this screen, forwarding applications per port basis to specified network servers is
customized. Once configured, the requests received from Internet for the configured
application and through the specified port will be forwarded to the appropriate servers
(computers). Before using forwarding, static IP addresses should be assigned to the
designated servers (use the DHCP Reservation feature on the Networking/TCP/IP
Settings screen).

Single Port Forwarding

Common applications are available for the first five entries. Select the appropriate
application, then enter the IP address of the server that should receive these requests.
Click the Enabled checkbox to activate this entry.

For additional applications, complete the following fields:

ƒ Application Name – Enter the name of the application.

ƒ External Port – Enter the external port number used by the server or Internet

application. Check the Internet application documentation for more information.

ƒ Internal Port – Enter the internal port number used by the server or Internet

application. Check the Internet application documentation for more information.

ƒ Protocol – Select the protocol TCP or UDP, or select Both.

ƒ To IP Address – Enter the IP address of the server that should receive the requests.

ƒ Enabled – Click the Enabled checkbox to enable the applications you have defined.

Copyright

© IPitomy Communication, LLC

27

0007VRF

Advertising