Factory defaults, Firmware upgrade, Status – IPitomy IP1000 User Guide User Manual

Page 42

Advertising
background image

ƒ Ping Test The Ping test will check the status of a connection. Enter the IP address

or URL of the PC whose connection you wish to test, the packet size (default is 60
bytes), and how many times you wish to test it. Then, click the Start to Ping button.
The Ping screen will then display the test results. Click the Close button to return to
the Diagnostics screen.

ƒ Traceroute Test To test the performance of a connection, enter the IP address or

URL of the PC whose connection and click the Start to Traceroute button. The
Traceroute screen will then display the test results. Click the Close button to return to
the Diagnostics screen.

Factory Defaults

ƒ Factory Defaults The Factory Defaults screen allows administrators to restore the

IP PBX’s configuration to its factory default settings.

ƒ Restore Factory Defaults To clear all of the IP PBX’s settings and reset them to

its factory defaults, click the Restore Factory Defaults button.

Firmware Upgrade

The Firmware Upgrade screen allows you to upgrade the IP1000’s firmware.

ƒ Please Select a File to Upgrade Enter the name of the new firmware file, or click

the Browse button to find this file.

ƒ Start to Upgrade After the appropriate file is selected, click this button and follow

the on-screen instructions to perform firmware upgrading

Status

The Status screen displays information about the Routing function in the IP1000 and its
current settings. The on-screen information will vary depending on the Internet
Connection Type selected on the TCP/IP Settings screen.

Copyright

© IPitomy Communication, LLC

37

0007VRF

Advertising