IPitomy IP1000 User Guide - Manual (Page 59)

Select All, None, Check or uncheck multiple
s with the click of
No
Invert checkboxe
a button.
Refresh Scan the network for
devices. Scanning is done
No
using the settings in
Advanced Scan Settings.
The scan results displayed
depend on the active filters
(controlled via Advanced
Filter Settings).
Filter Only
ter applying
No Displays results of the last
network scan af
the filters set in Advanced
Filter Settings.
Tip: You must check the each item you wish to modify before issuing
any commands.
f discovered network devices uses two sources of information:
info about the device. Database info is preferred, so if a
rtain phone type in the database, this is listed instead of the
lp/info question mark to the right can be hovered over
checkbox beside
List of Devices & Extensions
The list o
o Network
o PBX Database
Device column lists
device is set to a ce
actual device type. The he
to get more specific info about the device.
Hover your cursor over the info icon to obtain details about the networked
evice or phone. This can be an important source of information about which
hones are available for live configuration.
If not
er
al).
d
p
you click refresh-view more than once in a short time period, the network is
re-scanned. The minimum time period allowed between scans is indicated und
advanced scan settings (Min Refresh Interv
Tip: The network is only scanned for new information when you click [Refresh].
Both Refresh & [Filter Only] apply whatever filters you have chosen to the
displayed list.
Copyright
© IPitomy Communication, LLC 54 0007VRF