IPitomy IP1000 User Guide - Manual (Page 97)

destination for all calls.
Setting the Default Incoming Destination
To set the Default Incoming Destination:
1. Click on Call Routing and Incoming. The Incoming Call Routing page
will appear.
2. Select a Default Incoming Destination from the drop-down box.
3. Click the Set button.
4. Click the Save Changes button.
Defining the Service Provider Destination
A service provider destination can also be defined. The service provider destination acts
as the default incoming destination for a particular provider. To set the service provider
destination:
1. Select an Incoming Destination from the drop-down box.
2. Click on Save Changes button.
3. Click on Apply Changes when ready to implement these changes to the
system.
Outgoing Routing
Outgoing routing tells the system what service providers certain types of calls should use.
The IPitomy 1000 comes with common outgoing call routes already provisioned in the
system:
ƒ 7 digit dialing
Copyright
© IPitomy Communication, LLC 92 0007VRF