IPitomy IP1000 User Guide - Manual (Page 99)

Adding a Service Provider
1. Select a service provider from the drop-down box to the left of the
Trunks list.
2. Click Add. The service provider will appear in the list.
3. Click on the Name of the provider.
4. Click the Up or Down button to position the service provider in the list in
the order calls are to be routed over this resource.
Deleting a Service Provider
1. Click on a Service Provider in the list.
2. Click Delete.
3. Click on Save Changes.
4. Click on Apply Changes when ready to implement these changes to the
system.
Implementation Note 5
Default Settings For Existing Routes
The Outgoing Call Routes already in the IPitomy 1000 have the following default
settings Route Type and route Number. These default settings cannot be changed.
The Name of the route, service provider associated with the route and the order in
which service providers are selected for the route can be changed.
PBX Setup
PBX setup is used by a System Administrator to manage system-specific and system-wide
capabilities of the IPitomy1000.
General
General setup manages the Administrative Settings for the system: User Name,
Password and Time Zone.
Edit General Settings
1. Click on PBX Setup and General. The General System Setup page will
appear.
2. Enter an Administrative User Name.
3. Enter an Administrative Password.
4. Re-enter the Password.
5. Select a Time Zone from the drop-down box provided.
6. Select a System Operator Destination. This is the destination that
people will go to when pressing ‘0’ while in a voicemail box, if Allow
Operator is enabled on a voicemail box.
Copyright
© IPitomy Communication, LLC 94 0007VRF