P. 27, When connecting to your tv via the other vcr – Sony GV-HD700 User Manual
When connecting to your TV via the other VCR
Select the desired connecting method according to the input jack of the other VCR. Connect
the VCR to the LINE IN input on the other VCR using the A/V connecting cable. Set the input
selector on the other VCR to LINE (VIDEO 1, VIDEO 2, etc.).
When your TV is monaural (When your TV has only one audio input jack)
Connect the yellow plug of the A/V connecting cable to the video input jack, then connect the
white (left channel) or red (right channel) plug to the audio input jack of your TV.
If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR) (GV-HD700E only)
Use a 21-pin adaptor (optional) to view playback pictures.
• When the A/V connecting cable is used to output images, images are output with SD (standard definition)
• If you connect the VCR to a TV using more than one type of cable to output pictures from a jack other
than the i.LINK jack, the order of priority of the output signal is as follows:
t COMPONENT OUT t A/V OUT
• HDMI (High-Definition Multimedia Interface) is an interface to send both video/audio signals. The
HDMI OUT jack outputs high quality images and digital audio.
[AUTO] (p. 55)
[16:9]/[4:3] (p. 56)
: Signal flow
A/V connecting cable