Panasonic RRXS410E - Manual (Page 10)

VQT3T14
10
10
The clock has not been set at the time of purchase.
The clock is used as a file name ( ➜ page 61) or to preserve recording date and time
information. Set the correct date and time.
• Turn the power on. ( ➜ page 9)
1 Press [MENU].
2 Press +, – to select “COMMON
MENU” and press [q OK] to enter.
3 Press +, – to select “DATE & TIME”
and press [q OK] to enter.
4 Press +, – to set the
year and press i.
The above illustration is a display example.
5 Press +, – to set the month and
press i.
6 Press +, – to set the date and press
i
.
7 Press +, – to set the clock indication
method and press i.
“ 24H ” and “ AM / PM ” are displayed for the
24-hour display and the 12-hour display
respectively.
8 Press +, – to set the hour and press
i
.
9 Press +, – to set the minute.
To change the setting, press u, i to
move between the items, and then press
+, – again to make the setting.
10 Press [q OK] to enter.
The date and time are set and the clock
starts to operate.
To exit the setting screen, press
[F2 (CLOSE)].
* The clock operates with the monthly loss/gain of approx. 60 seconds at normal temperature.
* The clock setting will be lost if the battery is removed or completely exhausted.
Setting the clock
F2 F1
MENU
VQT3T14_RR-XS410_400-E_En.indd 10 VQT3T14_RR-XS410_400-E_En.indd 10 2011/06/22 15:00:26 2011/06/22 15:00:26