Inserting the battery/charging – Panasonic RRXS410E User Manual

Page 8

Advertising
background image

VQT3T14

8

8

The status indicator lights and recharging starts.
Also, “CHARGING” is shown in the unit’s display and
the battery indicator changes as shown below.

CHARGING

*

While charging, sliding the OPR/HOLD switch to the
original position can cancel charging halfway.

*

When the status indicator goes out, charging is complete.

g

Disconnecting the unit

Double-click the icon (Windows XP: [ ], Windows Vista/
Windows 7: [ ]) on the task tray at the bottom of the
computer screen and follow the on-screen instructions to
remove the unit. (The icon may not be displayed depending
on the OS settings.)
After the unit is removed, this unit turns off.

*

If BATT. SETTING in the common menu is set to
“ALKALINE”, the battery cannot be charged.

*

When using a rechargeable battery, use the supplied
rechargeable battery or the optional rechargeable
battery (

➜ page 2). If commercially sold batteries other

than the above are used, operation is not guaranteed.
Do not charge a dry cell battery.

*

If charging does not start, switch Hold off once and
switch Hold on again.

*

If the temperature of this unit has risen or an
undesignated rechargeable battery has been inserted,

” is displayed. (

➜ page 71)

*

When the computer is in sleep mode or is restarted,
recharging may be impossible.

*

Charging is possible even during data transfer.

*

The rechargeable battery does not need to be fully
depleted before recharging.

*

The rechargeable battery or this unit may become hot
while charging, but this is not a malfunction.

*

If the usage time becomes remarkably short even
though the battery is fully recharged, the battery
has reached the end of its lifespan. Purchase a new
rechargeable battery (

➜ page 2).

*

An AAA, LR03 alkaline battery (not supplied) can also
be used.

*

If you use an alkaline battery, set the BATT. SETTING in
the common menu to “ALKALINE”. (

➜ page 52)

*

Remove the battery from the unit if you will not use it for
a long period of time.

*

Make sure to turn the power off before removing the
battery.
• If the battery is removed while the unit is on, data may

be lost or this unit may be damaged.

Inserting the battery/Charging

VQT3T14_RR-XS410_400-E_En.indd 8

VQT3T14_RR-XS410_400-E_En.indd 8

2011/06/22 15:00:26

2011/06/22 15:00:26

Advertising
This manual is related to the following products: