Panasonic RRXS410E - Manual (Page 48)

VQT3T14
48
48
Using the timer
Audio can be recorded at the set date and time. The timer can also be used as an alarm
by playing back files or sounds. Set the clock correctly beforehand. ( ➜ page 10)
• Press [g STOP/RETURN] to stop the unit.
1 Press [MENU].
2 Press +, – to select “COMMON
MENU” and press [q OK] to enter.
3 Press +, – to select “TIMER &
ALARM” and press [q OK] to enter.
4 Set items such as
the date and time,
and sound source.
For details on the items,
see page 49.
1 Press +, – to select the item and press
[q OK] to enter.
2 Press +, –, u, i to select the setting
and press [q OK] to enter.
Repeat steps 1 and 2 to complete the
settings.
5 Press +, – to select “OK” and press
[q OK] to enter.
To exit the setting screen, press
[F2 (CLOSE)].
* Be sure to perform the “OK” operation in
step
5 . If this operation is not performed,
the timer will not operate correctly. If a button
such as [F2 (CLOSE)] is pressed while setting
the timer, “REGISTER SETTING?” may be
displayed. Select “YES” or “NO” and press
[q OK] to enter.
* The sound volume at the timer playback is the
same volume as when the timer was set.
Set the appropriate sound volume before
setting the timer.
F2
MENU
g STOP/RETURN
VQT3T14_RR-XS410_400-E_En.indd 48 VQT3T14_RR-XS410_400-E_En.indd 48 2011/06/22 15:00:29 2011/06/22 15:00:29