Panasonic RRXS410E - Manual (Page 30)

VQT3T14
30
30
Recording from other devices
This is the method to record to the “L” folder by connecting an external device to the external microphone/
Line-in jack of this unit.
• Press [g STOP/RETURN] to stop the unit.
1 Slide the Line/Mic switch
to [LINE].
LINE
MIC
2 Press [MENU].
3 Press +, – to select “LINE REC” and press
[q OK] to enter.
4 Press +, – to select “LINE INPUT” and press
[q OK] to enter.
5 Press +, – to select the
setting and press [q OK]
to enter.
When connecting to the headphone terminal of
external device, the line output terminal of portable
device or the line output terminal of component stereo,
select “HIGH”, “MEDIUM” or “LOW” respectively.
(The factory setting is “HIGH”.)
6 Press [F2 (CLOSE)].
7 Connect the external device
L R
Insert
securely.
Audio Cable without resistor
(not supplied)
Audio device
To LINE OUT
(audio out)
terminal To audio output
(headphone)
terminal
Plug type:
ø 3.5 mm stereo
mini plug
Connect with the external device and slide the Line/
Mic switch to “LINE”. Then, the selected line input
setting and the line recording mode will appear.
(
➜ page 32)
Line input setting
: HIGH
: MEDIUM
: LOW
VQT3T14_RR-XS410_400-E_En.indd 30 VQT3T14_RR-XS410_400-E_En.indd 30 2011/06/22 15:00:27 2011/06/22 15:00:27