Panasonic RRXS410E - Manual (Page 34)

VQT3T14
34
34
The playback speed of MP3 files can be adjusted
with 21 stages between slow playback (50%) and
fast playback (200%). (For WMA files: 13 stages
between 50% and 120%)
The speed cannot be adjusted when PCM files are
being played back. Playback is at 1x speed (100% ).
1 Press [FAST] or [SLOW] during playback or
while the unit is stopped.
Each time you press the button, the playback speed
becomes faster (FAST) or slower (SLOW).
Status indication
During playback,
the playback speed
is displayed.
Playback speed:
Playback speed can be adjusted by 10%-step for speed
faster than 100% and by 5%-step for speed slower than
100%.
Status indication during playback:
100% playback, playback faster than 100% and playback
slower than 100% are displayed as “ ”, “ ” and “ ”
respectively.
* The speed cannot be adjusted for playback using folder
cue ( ➜ page 42) or timer playback (➜ page 48).
Changing the playback speed
Playback repeats between the start point (A) and
finish point (B) if those points are set.
1 Press [A-B&] while playing.
The start point (A) is set and
“ ” (blinking) and “
” are
displayed.
2 Press [A-B&] at the fi nish
point (B).
The display changes to “ ”
(lighting) and repeat play starts.
Cancelling A-B Repeat:
Press [A-B&], u, i or [g STOP/RETURN].
* You cannot set A-B Repeat when the time between the
start point (A) and finish point (B) is approx. 2 seconds
or less.
* When only the start point (A) is set and playback continues
until the end of the file, the end becomes the finish point
(B) and A-B Repeat begins.
* A-B Repeat by setting the range using 2 files is not
possible.
A-B Repeat play
VQT3T14_RR-XS410_400-E_En.indd 34 VQT3T14_RR-XS410_400-E_En.indd 34 2011/06/22 15:00:28 2011/06/22 15:00:28