Panasonic RRXS410E - Manual (Page 45)

VQT3T14
45
45
ENGLISH
Editing: Combining fi les
1 Select “COMBINE” in the editing setting
screen (➜ “Displaying the editing setting
screen”, page 44).
2 Press +, – to select “PREVIOUS FILE” and
press [q OK] to enter.
3 Press +, – to select the fi les
to be combined and press
[q OK] to enter.
When selecting files by switching
folders, press u, and you can move
within hierarchies. (For details of file
and folder selection methods, see
page 12.)
4 Press +, – to select “NEXT FILE” and press
[q OK] to enter.
5 Press +, – to select the fi le to
be combined at the back of
the previous fi le and press
[q OK] to enter.
6 Press +, – to select “NEXT” and press
[q OK] to enter.
7 Press +, – to select “YES” and press [q OK]
to enter.
While the files are being combined, the status indicator
flashes.
• If you press [F2 (CLOSE)] before combining is
complete, the combine process is cancelled.
* Combined files cannot be returned to their original state.
It is recommended that you make backup copies of the
files in advance.
* If indexed files are combined, the indexing is erased.
* The combined file is saved in the same folder as the
previous files.
Files cannot be combined in following cases.
* Files in the MUSIC (M) folder or recycle bin ( ) folder.
* When the battery indicator displays “ ” (blinking) or “ ”.
* Combining files from the internal memory with files from
the SD card.
* If the total file size after combining will exceed 2 GB.
* If there is less free memory space than the size of the
“NEXT FILE”.
* If the recording mode of the two files is different.
2 files recorded on this unit can be combined into 1 file.
VQT3T14_RR-XS410_400-E_En.indd 45 VQT3T14_RR-XS410_400-E_En.indd 45 2011/06/22 15:00:29 2011/06/22 15:00:29