Panasonic RRXS410E - Manual (Page 56)

VQT3T14
56
56
Connecting this unit to a computer
You can copy files recorded on this unit to the
computer.
• Start the computer beforehand.
• Turn the unit off beforehand.
1 Take out the unit’s USB plug.
Push and slide
until a “click”
sound is heard.
Storing the USB plug:
2 Connect the unit to a computer using the USB port.
Insert the USB plug
straight in the same
direction as that of
the terminal.
If the unit cannot be connected to the computer directly,
use the USB extension cable (supplied).
* Do not use any other USB extension cables except the
supplied one.
Do not use the supplied cable with other devices.
Caution: Use only the supplied USB extension cable with
a ferrite core when connecting to computer.
* The first time you connect the unit to your PC
Because multiple “Found New Hardware” messages will
appear, do not disconnect the unit from your PC until all
messages disappear.
* Screen display during connection with PC
ACCESS...
During connection During file transfer
* This unit cannot be operated while connected to the
computer.
* When the unit is connected to your PC, it can operate
without the battery, because power is supplied by the
computer.
* When the unit is connected to the computer, the
computer may not start (restart). It is recommended that
the unit is removed from the computer when starting
(restarting) the computer.
VQT3T14_RR-XS410_400-E_En.indd 56 VQT3T14_RR-XS410_400-E_En.indd 56 2011/06/22 15:00:29 2011/06/22 15:00:29