Panasonic RRXS410E - Manual (Page 31)

VQT3T14
31
31
ENGLISH
8 Press and hold [* REC] for
1 second or more.
The unit enters the recording
standby.
9 Play back the external device and adjust the input/
output level.
1
To reconfigure the line input settings, press [MENU]
and follow steps 4 to 6 .
2 If the level meter swings and “ ” is displayed, the
volume of the external device is too high. Adjust the
volume of the external device to the “ ” range,
even if the volume is turned to the maximum.
3 Stop the external device by cue operation for the
sound source.
10 Press [* REC] to start recording.
11 Play the external device.
* Read the operating instructions for the connected
device.
* Disconnecting the audio cord during recording will stop
recording.
* Change the line recording mode as necessary.
(
➜ page 32)
* Recorded files by the line input are saved to the L folder.
This unit has the following synchro recording function.
This function detects the silence between tracks, etc.
and then records each track into different files, such as a
first track, second track, etc. If detecting sound from the
external device, recording starts automatically. If detecting
silence for approx. 2 seconds or more, recording is
paused. Detecting sound again will resume recording.
Synchro recording setting
• Press [g STOP/RETURN] to stop the unit.
1 Press [MENU].
2 Press +, – to select “LINE REC” and press
[q OK] to enter.
3 Press +, – to select “SYNCHRO REC” and
press [q OK] to enter.
4 Press +, – to select “ON
(Auto Stop)” or “ON
(Manual Stop)” and press
[q OK] to enter.
Auto: If silence continues for approx. 15 seconds, the
recording stops.
Manual: Even if silence continues, the recording
continues to be paused (standby) until
[g STOP/RETURN] is pressed.
VQT3T14_RR-XS410_400-E_En.indd 31 VQT3T14_RR-XS410_400-E_En.indd 31 2011/06/22 15:00:28 2011/06/22 15:00:28