Panasonic WJ-NV200 - - Manual (Page 14)

14 15
e Error button
Indicates that an alarm has occurred. Turn yellow in the error state. Clicking the buttons will toggle between
displaying/not displaying buttons such as the error log button and the error reset button.
r Alarm log display button
The alarm log display button is displayed on the operation panel of the control screen.
t Alarm reset button
Cancels the alarm action. Clickable only in the alarm state.
y Error log button
The alarm log display button is displayed on the operation panel of the control screen.
u Error reset button
Cancels the error action. Clickable only in the error state.
i Face matching start/stop button
Start/stop face matching actions manually. Face matching will resume when this button is clicked during
pause. Face matching will stop when this button is clicked during face matching actions.
o Face display (Thumbnail) button
The latest face matching results are displayed on the operation panel of the control screen. (☞ Page 43)
Live monitor (monitor for display of live images only)
Important:
• Configuration and operation of the recorder from the live monitor is not possible.
Live images from a camera set up in advance can be displayed on a 1-screen on the live monitor. When several
cameras are selected, camera images will be switched sequentially at the selected switching interval (sequence
display ☞ Installation Guide).
Note:
• Multiscreen display is not possible.
• The camera title and time & date are not displayed on the live screen.
• The time & date and camera also appear on the camera image displayed on the live monitor, but some char-
acters may be cut off.
• To display images, it is necessary to select the cameras to be displayed in the setup menu in advance. The
recorder is not configured to display camera images by default.
• Depending on the selected switching interval, a black screen may appear before camera images are dis-
played.
• When the secret view function is selected, the image selected for the main monitor will not be displayed.
• The image of a camera where an error has occurred will not be displayed.