Panasonic WJ-NV200 - - Manual (Page 77)

76 77
Step 1
Click the [Control] button on the top page (☞ page
58) of the operation window.
Step 2
Click the button in the [Copy] box.
→ The "Copy" window will be displayed.
Copy recorded images
Copy images recorded by the recorder on an SD memory card. It is recommended to make back-up copies on
a regular basis for unexpected situations such as malfunction of the hard disk drives.
Refer to page 39 for further information about the copy function. Refer to page 81 for information on how to
play copied images.
Step 3
Specify the detailed conditions of recorded images to
be copied. Specify the information to be set as condi-
tions.
[Date & time range]
Designate the start time and date and the end time
and date of recorded images to be copied. Click the
[
C] button, and then designate time and date.
[Camera]
Select the camera you wish to copy. Mark the check-
box next to the desired camera. When the checkbox
for [All] is marked, the checkboxes of all cameras can
be marked.
[Copy drive]
Make sure that "HDD→SD" is selected as destination
medium.
[Alteration detection]
Determine whether or not to attach the alteration
detection code to the recorded images to be copied.
When the alteration detection code is attached, it is
possible to check if the copied recorded images have
been altered or not when playing the copied recorded
images using the viewer software. Click the [
C] but-
ton, and then select "On" or "Off".