Panasonic WJ-NV200 - - Manual (Page 49)

48 49
Iris (brightness) adjustment
Adjusts the lens iris of the camera.
Step 1
When displaying the images on a 4-screen, select the
desired cameras.
Step 2
Click the [Detail] button.
→ The "Camera control [Advanced]" panel will be
displayed. (☞ Page 46)
Step 3
Press the [–] or [+] button.
It is possible to reset the set brightness by clicking
the [Reset] button.
Auto mode function of the camera
Activate the auto function of the camera according to the settings of the camera.
Step 1
When displaying the images on a 4-screen, select the
desired cameras.
Step 2
Click the [Detail] button.
→ The "Camera control [Advanced]" panel will be
displayed. (☞ Page 46)
Step 3
Click the auto mode button [ C] of the camera, and
select one of the following auto modes:
Auto track/ Auto pan/ Preset sequence/ Patrol
Step 4
Click the [Start] button to start the selected auto
mode function.
Note:
• Click the [Stop] button to turn off the auto mode
function of the camera.
• Refer to the operating instructions of the connect-
ed camera for further information about the auto
mode function of the camera.