Panasonic WJ-NV200 - - Manual (Page 89)

88 89
Notification by e-mail
Alarm mail
The address of the recorder contained in an alarm mail as follows.
Contents of the alarm mail: NV200 (192.168.0.250), alarm was occurred.
Alarm date: xxx-x-x xx:xx:xx xx:xx (Example: 2010-1-1 12:00:00)
Cause of alarm: Displays an event type and a camera or an alarm number (Example: SITE ALARM 5ch)
URL: http://192.168.0.250/
Warning mail
The following mail will be sent to notify of a trouble occurrence to a registered address when the trouble occurs.
NV200 (192.168.0.250) STATUS REPORT
DATE: 2010-1-1 12:00:00
STATUS: The description of the trouble will be displayed. (Ex. THERMAL ERROR)
Indication Description
Time and date Time and date when the trouble occurred will be displayed.
STATUS The description of the trouble will be displayed. xx is the camera number, y is the disk
number and f is the cooling fan number.
Thermal trouble
: THERMAL ERROR
Alteration detected : ALTERED xxch
HDD smart warning : HDDy SMART WARNING
HDD hour meter warning : HDDy HOUR METER WARNING
Auto remove of link : HDDy LOGICALLY REMOVED
Cooling fan error : FANf ERROR
NW link error : NETWORK LINK ERROR
NW camera error detection : CAM xx COMMUNICATION ERROR
Network camera error
detection (audio)
: CAM xx COMMUNICATION ERROR(AUDIO)
NW camera error recovery : CAM xx COMMUNICATION RECOVERED
Network camera error
detection (audio)
: CAM xx COMMUNICATION RECOVERED(AUDIO)
HDD remove error : HDDy SWAP WARNING