Panasonic WJ-NV200 - - Manual (Page 87)

86 87
Focus adjustment
Adjust the focal point. The auto focus function is available.
Focusing can be adjusted by clicking the [Near] button or the [Far] button.
The auto focus function can be performed by clicking the [Auto] button.
Iris (brightness) adjustment
Adjusts the lens iris of the camera.
The brightness (lens iris) can be adjusted by clicking the [–] (darker) button or the [+] (brighter) button. It is pos-
sible to reset the adjusted brightness by clicking the [Reset] button.
Register preset positions
Register the current camera position as a preset position. The preset positions can be registered only when
using a camera supporting the preset position function.
Step 1
Perform the pan/tilt operation to move the camera to
the position to be registered.
Step 2
Click the [ C] button in the [Preset Position] box to
select a preset number (1 - 256).
Note:
• It is impossible to register the position as "Home".
Some Panasonic cameras allow you to register a
[Home] position. Refer to the "readme.txt" on the
provided CD-ROM about the supported camera.
Step 3
Click the [Regist] button.
→ The preset position will be registered under the
selected preset number.
Move to preset positions
Move the camera to the preset position registered in advance. Preset positions need to be registered in
advance.
Step 1
Click the [ C] button in the [Preset Position] box to
select a preset number (Home, 1 - 256).
Step 2
Click the [Call] button.
→ The camera moves to the registered preset posi-
tion respective to the selected preset number.