Panasonic WJ-NV200 - - Manual (Page 22)

22 23
Change the camera display position on the screen
The default camera display positions are as follows:
It is possible to change the camera image by dragging & dropping the number of the camera assigned to the
screen segment (1 to 16) onto the desired display position.
Note:
• When a camera is assigned to a screen segment to which another camera is already assigned, the image of
the camera originally assigned to that position will disappear.
• The assigned camera position is retained even if the recorder is rebooted (note however that initializing the
settings will also reset the camera positions to the defaults).
• The audio of the camera assigned to the top left position will be output.
• Audio output may be delayed depending on the size of the displayed image.
• If "Mute" was selected on the control screen, no audio will be output.
Display or hide the camera title
It is possible to display/hide the camera title displayed on the monitor.
3-screen 9-screen 9-screen 16-screen
1
1
2
3
1 2 3
4 5 6
1 2 3
4 5
6 7
2 3 4
5 6 7
8 9 10
14 15 16 11 12 13 8 9
Step 1
Each time the [OSD] button is clicked, the camera
title will be displayed/hidden.
Note:
• The setting to display/hide the camera title will be
retained until the power is turned off. Once the
power is turned off and on again, the camera title
will be displayed on system start.