Record images, Record images (schedule recording) – Panasonic WJ-NV200 - User Manual

Page 24

Advertising
background image

24

25

Live images can be recorded on the recorder. Images from up to 6 cameras can be simultaneously recorded
with this recorder.

Record images (schedule recording)

Recording can be automatically started and stopped according to a previously specified schedule. Refer to the
Installation Guide for schedule recording.

Note:

• When event recording is triggered by an alarm during the schedule recording, event recording has the higher

priority. Refer to the "Recording mode and its priority" section below for further information about the priori-
ty of the recording mode.

• To stop schedule recording, stop the recording on the setup menu. Refer to the Installation Guide for further

information.

• In case of a network error, the image of the camera where the communication error has occurred will not be

recorded. Recording starts when the network error is recovered.

• Schedule-recorded image data will be divided into multiple files every hour on the hour. In that moment,

recording may sometimes be interrupted around for 1 second.

Recording mode and its priority

There are 3 recording modes. The recording modes and their priority levels are as follows.
When two or more recordings with different recording modes started simultaneously, only recording with the
higher priority will start.

Recording mode

Priority

Event recording

1

Schedule recording

2

Pre-event recording

3

Record images

Network cameras

HDD

Image data

Recorder

Advertising