Panasonic WJ-NV200 - - Manual (Page 76)

76 77
Cancel the alarm action
To cancel the alarm action manually, click the [ALM] button in the status display area.
→ The alarm action will be canceled. The event recording will stop and return to the operational status just
before the event occurred.
Cancel the error action
When an error occurred, this recorder will take an error action. An error display window providing information on
the error that occurred will be displayed on the web browser. To cancel the error action manually, close the error
display window, and click the [ERR] button in the status display area.
→ The error action will be canceled.
Note:
• When an error occurs, take remedial action by following the instructions displayed on the error log panel (☞
page 35). The error indicator on the front of the recorder will go off when the cause of the error has been
eliminated.