Panasonic WJ-NV200 - - Manual (Page 69)

68 69
[Camera]
Searches for images recorded using the selected
camera. Mark the checkbox corresponding to the
desired camera. When the checkbox for [All] is
marked, the checkboxes of all cameras can be
marked.
Step 3
Click the [OK] button.
→ [Filtering] appears in the status display area, and
the filtered result will be displayed in the list dis-
play area.
[Total]
Displays the total number of searched data. When
more than 10000 data matched, the ">10000" indica-
tion will be displayed.
[All list] button
Cancels filtering and displays all recording events.
[Refresh] button
Updates the list to the latest one.
Step 1
Click the [Control] button on the top page (☞ page
58) of the operation window, and click the [REC
event] button in the [Search] box.
→ The recording event search window will be dis-
played.
Step 2
Specify the search conditions (filters).
[Date & time range]
Select a time range by designating a start and end
time and date. The designated time range will be
searched.
[REC event]
Searches for images recorded by the selected record-
ing mode only. Check the checkbox corresponding to
the desired event type. When the checkbox for [All] is
marked, the checkboxes of all of the following events
can be marked:
Schedule [SCH]: Recording by the schedule
recording event
Terminal alarm [TRM]: Recording triggered by a
terminal alarm
Command alarm [COM]: Recording triggered by a
command alarm
Camera site alarm [CAM]: Recording triggered by
camera site alarm
Search and play recording events (REC event search)
Search the recording event list for a recording event and play it back.
Important:
• To use recording event search, "HDD" must be selected for [Disk/Medium].
It is also possible to filter recording events using the search filters.
• Face matching alarm cannot be played back by recording event search on the web browser. Start playback
from the alarm log list. (☞ Page 59)