Panasonic WJ-NV200 - - Manual (Page 33)

32 33
Step 4
If VMD search takes too much time or the search pro-
duces too many results, set a mask duration to
reduce the search frequency. When mask duration is
set, no motion detection will be performed from the
time motion is detected to the time mask duration is
set.
To set, click the [
C] button next to [Mask duration
setup] on the advances setup panel.
Mask duration: 1s/ 5s/ 10s/ 30s/ 1min/ 5min/
10min
Default: 1s
Step 5
Click the [Back] button or the [x] button.
→ The display returns to the VMD search panel.
Set up VMD areas, etc. [VMD search setup]
Set up VMD areas within images and a mask duration.
Note:
• Playback can also be stopped and live images
displayed by the following operations:
• When pressing the [x] button on the date &
time operation panel (playback display).
• Changing the playback medium
Step 1
Display the images from the camera to search on a
1-screen. (☞ Page 19)
Step 2
Click the [Setup] button next to [Detection area /
Mask duration].
→ The "VMD search setup" panel will be displayed.
Step 3
On the displayed image, click the upper left and lower
right corner of the square that will become the VMD
area.
→ The area set up for VMD search turns gray.
Note:
• As the detection areas will be set up to match the
image display area divided into 16x16 segments,
the top left and bottom right detection areas may
not be exactly as designated.
Step 6
To stop playback and return to live images, click the
stop button on the playback operation panel.
→ Playback will stop, and live images will be dis-
played.