Panasonic WJ-NV200 - - Manual (Page 15)

14 15
Basic operation
Entry field
To operate, use the mouse connected to the recorder to move the mouse cursor displayed on the main monitor
and left-click the buttons or tabs displayed on the screen. (Hereinafter, "Left-click..." will be described as
"Click..." in this document.)
In lines where the [ D]/[C] buttons are displayed, the value on which the cursor is placed can be changed by
turning the mouse wheel. For example, when setting time and date, the hours, minutes and seconds can be
changed.
The shape of the mouse cursor will change as follows depending on the display screen and mouse operation.
: Normal operation
: When dragging a camera number panel (wide view screen)
Note:
• When no operation is made for 10 seconds or more, the mouse cursor will be hidden. The mouse cursor will
be displayed again when the mouse is moved.
• It is impossible to connect a mouse to the mouse connection port if the connector from the mouse is upside
down. When it is hard to connect, check the upside down position of the connector from the mouse.
About the operation of on-screen keyboard
Setting items can be entered using the on-screen keyboard. When clicking the [ ] icon beside the entry field,
the on-screen keyboard will be displayed, and it will become possible to enter characters by clicking the char-
acter keys on the keyboard.
[Del all] button
Deletes all the characters in the entry field.
[
←
]/[
→
] button
Move the cursor in the entry field to either direction.
[Delete] button
Deletes a character pointed by the cursor in the entry
field.
[A/a] button
This button changes the characters to be entered
between capital letters and small letters.
[Next] button
Changes the keys to be displayed for character entry.
The displayed keys are changed as follows: Keys for
the language selected by the language selection pull-
Language selection pull-down menu
Click the [ C ] button to select the language for
character entry.