Goulds Pumps XHD - IOM - Manual (Page 100)

Maintenance
Install the casing volute liner
NOTICE:When the Dynamic Seal option is provided, be sure the power end and expeller
assembly are adjusted prior to volute liner installation so that the expeller does not interfere
with the installation of the volute liner.
1. Coat the threads of the casing volute liner retention studs (356K) that will be inserted into
the casing volute liner (561) with anti-seize compound.
2. Insert the casing volute liner retention studs into the casing volute liner (561) using a metric
stud driver.
3. Coat the seal cover-to-volute liner gasket (351Q) with lubricant and install into the casing
volute liner (561).
4. Support the casing volute liner (561) using the proper end of the Goulds-provided impeller/
casing volute hook tool.
98 XHD Installation, Operation, and Maintenance Manual