Goulds Pumps XHD - IOM - Manual (Page 98)

Maintenance
5. Install the hex head capscrews (370Y) through the pedestal flange into the gland half
casing (100D) to complete assembly.
Stuffing box assembly and installation
Pump model Next step to follow
XHD Value Option
• Go to Install the seal cover instructions.
XHD
• You will need to assemble the two split stuffing
box halves before attaching the stuffing box to
the seal cover. Start with the next step, Assem-
ble the split stuffing box.
Install the seal cover
1. Lubricate and install the seal cover-to-casing volute liner gasket (351Q) onto the seal cover
(184).
2. Attach the seal cover (184) to the gland half casing (100D) using the seal cover retention
socket head cap screws (388A) and clipped washers (354A).
Assemble the split stuffing box - XHD
1. Position the flat gaskets (367B) between the two halves of the split stuffing box (159).
2. Assemble the two halves of the split stuffing box (with gaskets in place) using the stuffing
box shoulder bolts (328). Apply a liberal coating of silicone sealant to both faces of the split
stuffing box before the gasket is installed.
3. Attach the stuffing box (159) to the seal cover (184) using the stuffing box-to-seal cover hex
head cap screws (569L).
96 XHD Installation, Operation, and Maintenance Manual