Festo Модуль перемещения HSP - Manual (Page 36)

HSP−...−AP/A S
Festo HSP−...−AP/AS 0508a English
36
3 Method of operation and use
By means of the path guide 4 and the cross
guide aB a movment in a vertical and horizonĆ
tal direction is forced (y−z path). Spring
clamping elements fitted to the end stops
1
guarantee a high degree of repetition accuĆ
racy in positioning.
Self−adjusting hydraulic shock absorbers 2
(only with type ...−AP) in the end positions
cushion the movement. The end positions can
be scanned with proximity switches of type
SME/SMT−8−...Ă. The switching status of the
proximity switches can be observed through
the viewing window when the housing cover is
fitted on.
The stroke range for both end positions (receive and release positions) is set
separately:
ć in the y−direction: via the adjusting screws in the links 3
ć in the z−direction: via the stop screws on the vertical guide rail 5
Handling module type HSP−...has been designed for use in automated component
assembly in handling and fitting systems.
The HSP−... is particularly suitable for handling small parts at high speed, e.g.
when inserting, turning over or joining.
4 Transport and storage
S Take the weight of the HSP−... into conĆ
sideration. Depending on the size, the
basic design can weigh up to 8.2 kg.
S Consider the following recommendations
regarding storage:
Storage duration 48 months
Storage temperature + 20 °C
Fig. 2
z
y
Fig. 3