Revolabs FLX2 VoIP Advanced - Manual (Page 73)

73
password should be changed by the system administrator. Please
ensure that you take note of the changed password.
Recent Call
Enabled Use the Recent Call Enabled option to enable or disable the
Recent Calls list on the FLX Handset. The default setting is On.
Web Access
Enabled Use the Web Access Enabled option to enable or disable the FLX
web interface. If access is enabled, users can browse to the FLX
using a web browser. Even if enabled, the web interface is
password protected for all pages. It is restricted to Administrator
use. If disabled, any web-access is rejected. Once web access is
disabled, it can only be enabled again by an administrator from the
handset. The default setting is On
Language and Country
Language and Country
Language
Select the handset language from the list of available languages.
Country / Region Select the country or region you are in. This selection will affect
country specific settings. Please change this setting from the
current region to another region only if you move the unit to that
different country/region, or if advised by Revolabs support to do
so.
Importing and Exporting Configuration Settings
Through the web interface you can import and export FLX configuration settings. These
features are particularly useful if you are installing several FLX phones and want them
all to use the same base set of configuration values.
A common procedure would be to configure one FLX phone as desired, ensure that it is
working properly in your environment, and then export the configuration settings for that
phone. Then, you would use that configuration file as a starting point for the other
phones, importing that file into each of the other phones.
The export process creates a single XML file that includes all the core settings,
excluding the following:
• Static IP Address