Revolabs FLX2 VoIP Advanced - Manual (Page 77)

77
Microphones On/Off
To power off a FLX Microphone, hold down the button located on the Microphone until
the LED indicator turns solid red. Once the LED indicator is solid red, release the button
and the Microphone will power off.
To power a Microphone back on, either:
1. Hold down the button on the Microphone until the LED indicator on the
Microphone turns green. Once the LED indicator turns green, release the button
and the Microphone will power on and connect to the system.
OR
2. Return the Microphone to an active Charger Base and take it out again. It will
power on automatically.
Battery Exchange
The rechargeable batteries in the different FLX components can all be exchanged.
Please note that only Revolabs approved batteries should be used for the replacement.
The following sections explain how to change the batteries in the different components.
We recommend charging any component for 8 hours after exchanging the battery.
Caution : Risk of explosion if batteries are mishandled or replaced by an incorrect type. Do not
disassemble batteries or attempt to charge outside the system. Do not dispose of batteries in
fire. Dispose of batteries in accordance with manufacturer’s instructions and local regulations.
Replace batteries only with Revolabs approved batteries! Please contact Revolabs
(www.revolabs.com) or your AV service provider for correct manufacturer approved and
recommended replacement type batteries.