Connecting using aux in / aux out – Revolabs FLX2 VoIP Advanced User Manual
Page 79
Advertising
79
Speaker
To change the rechargeable battery in the FLX speaker you will need to use a
screwdriver to loosen the screw on the bottom of the speaker.
Once the screw is loose, the bottom door of the speaker will open, revealing the
rechargeable battery pack. Carefully take this battery pack out of the speaker
enclosure, unplugging the wire.
Plug the new replaceable battery into the connector, and place it into the speaker. Close
the door, and re-tighten the screw.
Connecting using AUX IN / AUX OUT
The following table shows the different cables required to connect the FLX to common
videoconferencing codecs in the market.
Advertising