Lenovo Secure Managed Client - Manual (Page 28)

5.
Push the drive carrier until the foot on the base of the drive carrier engages
with the enclosure. Continue to push firmly until the handle fully closes. A
click should be heard as the latch engages and holds the handle closed.
Activating an anti-tamper lock
To active an anti-tamper lock, do the following:
1.
Carefully insert the TORX* screwdriver provided into the cutout in the handle
(see 1 i the following figure).
2.
Turn the screwdriver in a clockwise direction until the lock symbol is visible in
the aperture beside the key (see 2 ).
Figure 19. Engaging a drive carrier module in the enclosure
Figure 20. All drive carrier modules installed in enclosure
20 Secure Managed Client (SMC) - Storage Array Hardware Installation and Replacement Guide