Lenovo Secure Managed Client - Manual (Page 7)

Figures
1. Unlatching enclosure cover . . . . . . . . 6
2. Removing enclosure cover . . . . . . . . 7
3. Installing enclosure cover . . . . . . . . 8
4. Removing the processor air duct . . . . . . 9
5. Installing the processor air duct . . . . . . 10
6. Unlatching a power supply unit . . . . . . 11
7. Removing a power supply unit . . . . . . 12
8. Installing a power supply unit . . . . . . 13
9. Power supply unit in place . . . . . . . 13
10. Connecting power cords . . . . . . . . 14
11. Releasing the enclosure cover . . . . . . 15
12. Removing the cooling fan . . . . . . . . 16
13. Installing a cooling fan . . . . . . . . . 16
14. Re-installing enclosure cover . . . . . . . 17
15. Unlatching a drive carrier module . . . . . 18
16. Removing a drive carrier module . . . . . 18
17. Unlatching a drive carrier module . . . . . 19
18. Installing a drive carrier module . . . . . 19
19. Engaging a drive carrier module in the
enclosure . . . . . . . . . . . . . 20
20. All drive carrier modules installed in enclosure 20
21. Activating an anti-tamper lock . . . . . . 21
22. Deactivating an anti-tamper lock . . . . . 21
23. Removing hard disk drive from drive carrier 22
24. Installing hard disk drive into drive carrier 23
25. Locating FBDIMM sockets . . . . . . . 24
26. Installing FBDIMMs . . . . . . . . . . 25
27. Locating and removing the CMOS battery 27
28. Removing the SAS expander PCB . . . . . 28
29. Installing the SAS expander PCB . . . . . 29
30. Removing the Intel RAID Controller
SRCSATAWB . . . . . . . . . . . . 30
31. Installing the Intel RAID Controller
SRCSATAWB . . . . . . . . . . . . 31
32. Removing brace assembly . . . . . . . . 32
33. Removing boot drive module . . . . . . 32
34. Removing backplane from boot drive module 33
35. Installing lower boot drive . . . . . . . 33
36. Installing upper boot drive . . . . . . . 34
37. Attaching backplane to boot drive module 34
38. Connecting data cables to boot drive module
backplane . . . . . . . . . . . . . 35
39. Connector locations on server board . . . . 35
40. Connecting power cable to boot drive module
backplane . . . . . . . . . . . . . 36
41. Re-installing boot drive module . . . . . . 36
42. Re-installing brace assembly . . . . . . . 37
© Copyright Lenovo 2005, 2008 v